Multi-purpose furnace safety protection knowledge and operation method?

Multi-purpose furnace safety protection knowledge and operation method?

Heat treatment furnace is one of the important process equipment in machinery manufacturing industry.

Multi-purpose furnace product classification:

1. Bell cap furnace: Periodic heat treatment furnace that heats the heating material in the bell cap furnace.

2 Roller table furnace: The roller table is used to transport heat treatment materials in the furnace, and the burner heating equipment and the furnace can be arranged above and below the roller table.

3. Chain furnace: a conveyor belt of heat treatment furnace.

4. Traction heat treatment furnace: Traction furnace is roughly divided into horizontal furnace and vertical furnace, widely used in cold rolled strip with tinning, galvanized, silicon steel, stainless steel and other continuous heat treatment furnace. Commonly used multi-purpose furnace heat treatment are resistance furnace, gas furnace, oil furnace. Thermal treatment enterprises from the perspective of labor safety and health. The resistance furnace is easy to control and has good sanitary conditions.

The role of the exhaust gas emission control device is to discharge the exhaust gas that can be replaced by the new atmosphere in the oven, and the role of the ignition burner is to generate co2 + h2o by fully improving the combustion exhaust gas (mainly co + h2) to prevent the pollution of the atmosphere and the risk of combustion explosion. Although we have solved the problem of pollutant emission standards, few enterprise management can be effective and reasonable use of a long-term stable combustion of waste gas heat, directly discharged into the atmosphere, causing waste of energy resources in our country.

Normal production operation of multi-purpose furnace

1. Automatic learning state, exhaust gas combustion, voltage can be opened, gas supply can be opened, heating mode can be opened, empty furnace parameters

2. Select the process

3. Press the automatic mode to light the charging indicator and press k8(automatic mode).

4. Use feeders to bring the working parts to the return furnace

5. Open the front door

6. Load the furnace

Step 7 Close the door

8. Press the stove head mounting button