Multipurpose furnace production line

Operation of multipurpose furnace production line

1, F1 interface: heat treatment procedures, can be controlled in two different ways according to TIME and CD %, can be carried out other carburizing surface quenching without cold, carburizing quenching with cold, carburizing gas through quenching and other process design process;

2, F2 interface: load the workpiece and data sheet, the previous manufacturing data record, archive retention, and can be accessed at any time;

3, F3 interface: data record, furnace temperature, oil temperature, carbon potential curve can be recorded, short period, long period is divided into two kinds;

4, F4 interface: process monitoring, if in the FOCOS control state, you can perform process stop, run, jump, reset and other operations;

5, interface: fault, current fault, historical fault, fault overview;

6, F6 interface: carburizing curve, that is, the calculated data line;

7, F7 interface: practical application program, can calculate the conversion method between mv value, dew point, CO2 content and carbon potential through different temperature and CO content, can calculate the carbon black limit; The alloy coefficient of each building material can be analyzed according to the calculation.

8, F8 interface: interface furnace observation state, programming state, English switch;

9, F9 interface: password management;

10, F10 interface: system overview;

11, f11 interface: program end.